ABB標準驅動器可以連接到S800 I/O系統。FCI作為
現場總線主機和驅動器之間的通信鏈路。無應用程序
與該功能相關的軟件存儲在FCI中。檢查可用
支持每種FCI類型。
以下驅動器被視為標準驅動器：
•標準應用ACS600
•標準應用ACS800
•ACS600，帶起重機應用
•ACS800，帶起重機應用
•ACS600，帶泵和風扇應用（PFC）
•ACS800，帶泵和風扇應用（PFC）
•帶標準驅動器的ACS400
•帶標準驅動器的DCS400
•帶標準驅動器的DCS500
•DCS600，帶起重機應用
產品范圍
S800 I/O DTM 5.3版適用于執行各種任務，也稱為
稱為以下描述中的應用。應用程序具有圖形
用戶界面。該產品還包含具有HART工具路由的DTM
功能。工具路由描述了一種啟用子連接DTM的機制，
例如通過S800 I/O DTM與HART通信的基本HART DTM
連接到S800 I/O模塊的儀器。對于此功能，沒有圖形用戶
接口是必需的。

ABB Standard drives can be connected to the S800 I/O system. The FCI works as a communication link between the fieldbus master and the drives. No application software concerning this functionality is stored in the FCI. Check the available support for each FCI type. The following drives are considered to be standard drives: • ACS600 with standard application • ACS800 with standard application • ACS600 with crane application • ACS800 with crane application • ACS600 with pump and fan application (PFC) • ACS800 with pump and fan application (PFC) • ACS400 with standard drive • DCS400 with standard drive • DCS500 with standard drive • DCS600 with crane application Product Scope The S800 I/O DTM version 5.3 is suitable for executing various tasks, also referred to as applications in the following description. The applications have a graphical user interface. The product also contains DTMs that has HART tool routing functionality. Tool routing describes a mechanism to enable sub connected DTMs, such as the Basic HART DTM to communicate through a S800 I/O DTM to HART instruments connected to a S800 I/O module. For this function no graphical user interface is required.