二、正式保存

當文件保存間隔到后，軟件會將臨時文件和內存中未保存的數據，重新進行整理，保存成正式的數據文件，并刪除臨時文件。如果臨時文件特別多，則這個轉存操作會占用大量資源，甚至可能影響新的臨時文件保存。因此，綜合考慮性能和數據安全，建議保存間隔設置為30分鐘-2小時之間。如果系統的穩定性欠佳，并且數據非常重要，則建議將保存間隔縮小為10-20分鐘。軟件也會根據采集配置情況，自動調小保存間隔，以免出現內存處理的錯誤。手冊上對于保存間隔的設置有比較詳細的說明。

2、 Formal preservation

When the file save interval is reached, the software will reorganize the temporary files and unsaved data in memory, save them as formal data files, and delete the temporary files. If there are too many temporary files, this transfer operation will consume a lot of resources and may even affect the saving of new temporary files. Therefore, considering both performance and data security, it is recommended to set the save interval between 30 minutes and 2 hours. If the stability of the system is poor and the data is very important, it is recommended to reduce the save interval to 10-20 minutes. The software will also automatically reduce the save interval based on the collection configuration to avoid memory processing errors. The manual provides detailed instructions on setting the save interval.