來自Contrinex遠距離系列的堅固的電感式傳感器，高壓范圍，可以承受這種應用的高工作壓力。擴展工作距離允許在傳感面上使用厚的、密封的陶瓷盤而不影響傳感器的性能。

這些輕質的M5和M8直徑的可嵌入傳感器的長度分別為27mm和30mm。傳感器直接安裝在缸壁上，不影響工具的正常運行。感應距離為1毫米（M5傳感器）和1.5毫米（M8傳感器），消除了因與滑塊接觸而造成內部機械損壞的任何風險。

傳感器具有工業(yè)標準的PNP常開配置，并通過靈活的PUR護套電纜與客戶的控制系統(tǒng)連接。真空封裝的電子元件確保了出色的抗沖擊和抗振動能力，而且不需要額外的電氣或機械保護。

The sturdy inductive sensors from the Continex long-range series have a high voltage range and can withstand the high working pressure of this application. Condist ® The extended working distance of patented technology allows the use of thick, sealed ceramic discs on the sensing surface without affecting the performance of the sensor.
These lightweight M5 and M8 diameter embeddable sensors have lengths of 27mm and 30mm, respectively. The sensor is directly installed on the cylinder wall without affecting the normal operation of the tool. The sensing distance is 1 millimeter (M5 sensor) and 1.5 millimeters (M8 sensor), eliminating any risk of internal mechanical damage caused by contact with the slider.
The sensor has an industry standard PNP normally open configuration and is connected to the customer's control system through flexible PUR sheathed cables. Vacuum encapsulated electronic components ensure excellent impact and vibration resistance without the need for additional electrical or mechanical protection.