對于低壓大功率電機，為了獲得適宜的通電截面，往往需要多根電磁線進行并聯，同時，電機繞組的引接線部分，為了規避電機物理空間的局限性，以及電機接線、繞組絕緣處理過程可能涉及到的質量問題，也會通過多根較細導電直徑的引接線進行關聯。問題來了，并聯的引接線如何與并繞的電磁線進行連接？如何保證連接后繞組及引接線的正常運行？這是一個非常關鍵和重要的設計和工藝控制環節。

從簡單的物理知識我們可以分析，只有將每一相多股并繞的電磁線均勻地分配給多根的電機引接線，且保證每一個連接部位都可靠，才能有效保證電機繞組性能的正常運行，任何分配的不均勻，以及頭尾分配的不一致性，都可能導致引接線及電磁線電流密度的不均勻，出現繞組或引接線發熱的不良后果。

For low-voltage high-power motors, in order to obtain a suitable cross-sectional area, multiple electromagnetic wires are often required to be connected in parallel. At the same time, in order to avoid the limitations of the physical space of the motor and the quality issues that may be involved in the motor wiring and winding insulation treatment process, the connection of the motor winding's lead wire is also linked through multiple lead wires with finer conductive diameters. The question is, how can parallel lead wires be connected to parallel wound electromagnetic wires? How to ensure the normal operation of the connected winding and lead wire? This is a crucial and important design and process control process.
From simple physical knowledge, we can analyze that only by evenly distributing each phase's multi stranded electromagnetic wire to multiple motor leads, and ensuring that each connection is reliable, can the normal operation of motor winding performance be effectively guaranteed. Any uneven distribution, as well as inconsistency in head and tail distribution, may lead to uneven current density in the leads and electromagnetic wires, resulting in adverse consequences such as heating of the windings or leads.