從電機轉矩的計算公式（T=9550 P / n ）可以看出，當電機功率相同時，低速電機對應的轉矩較大。

電機軸伸是傳動的關鍵零部件，除電機與設備的對接尺寸控制外，電機軸伸的直徑大小、軸的材質，以及具體的加工控制要求，都直接影響著電機的轉矩能力體現，是一種機械能力表現。

當電機的轉矩超過其可以承當?shù)姆秶鷷r(shí)，即電機發生過載，電機的電流會因?yàn)檫^載出現大幅增加，導致繞組發生過熱燒毀問題；即使電機繞組能滿足過載要求，就電機的軸而言，過載意味阻力矩大，作用在軸上力矩太大時，會對軸伸造成直接的傷害，特別是對于軸伸加工不太規范的情況，容易發生電機軸伸撓曲或斷裂的質量事故。

From the calculation formula of motor torque (T=9550 P/n), it can be seen that when the motor power is the same, the torque corresponding to the low-speed motor is larger.
Motor shaft extension is a key component of transmission. In addition to controlling the docking size between the motor and equipment, the diameter of the motor shaft extension, the material of the shaft, and specific processing control requirements all directly affect the torque capability of the motor, which is a manifestation of mechanical capability.
When the torque of the motor exceeds its acceptable range, that is, the motor is overloaded, and the current of the motor will increase significantly due to the overload, causing the winding to overheat and burn out; Even if the motor winding can meet the overload requirements, for the motor shaft, overload means a large resistance torque. When the torque acting on the shaft is too large, it can cause direct damage to the shaft extension, especially for non-standard shaft extension processing, which can easily lead to quality accidents such as motor shaft bending or fracture.